Generally, it is mainly chicken that one needs to be careful about, because it is sometimes contaminated with unhealthy bacteria, even when bought “fresh”. A general procedure with all meat, and especially chicken, is to wash any surface that raw chicken comes in contact with when you are done preparing it and have started to cook it, then wash any utensils you used that touched the chicken, and wash you hands. To be extra cautious, you can do that for any raw meat. Raw meat should be refrigerated soon after purchase and now allowed to stand uncooked at room temperature for more than the time it takes to prepare it.
Thanks for explaining that! But, um… I still have more questions… What is the procedure for washing the surfaces, the utensils, and my hands? How do I know when the meat is cooked enough to not qualify as raw? And for stir-frying raw meat, do I need to pause the stir-frying process to wash the stir-frying utensils, so that I don’t contaminate the cooked food with any raw juices that happen to still be on the utensils?
Salmonella bacteria is killed instantly at 165°F. Cooking small chopped or sliced pieces of meat is hard to do wrong because the surface area to volume ratio is high enough that they will be sterilized even before they start to appear cooked. Make your slices less than 1⁄2 inch thick and cook them until they start to turn golden brown. As long as the business ends of your utensils are in contact with the food as it cooks they will be sterilized along with it.
Assuming that you already know how to wash things in general, you don’t need to do it any differently. Normal washing is good enough because bacteria can’t grow without a source of nutrients and moisture, and you need to ingest a fairly substantial amount of bacteria in order to get sick.
We should add that soapy water does not kill the bacteria, but rather makes it impossible for them to adhere to anything, so they get washed down the drain.
Washing bacteria down the drain is certainly the primary purpose for using soap, by far, but surfactants like soap also kill a few bacteria by lysis (disruption of the cell membrane, causing the cells to rapidly swell with water and burst). In practice, this is so minor it’s not worth paying attention to: bacteria have a surrounding cell wall made of a sugar-protein polymer that resists surfactants (among other things), dramatically slowing down the process to the point that it’s not practical to make use of it.
(Some bacteria are more vulnerable to surfactant lysis than others. Gram-negative bacteria have a much thinner cell wall, which is itself surrounded by a second, more exposed membrane. But gram-positive bacteria have a thick wall with nothing particularly vulnerable on the outside, and even with gram-negative bacteria the scope of the effect is minor.)
In practice, the big benefit of soap is (#1) washing away oils, especially skin oils, and (#2) dissolving the biofilms produced by the bacteria to anchor themselves to each other and to biological surfaces (like skin and wooden cutting boards). Killing the bacteria directly with soap is a distant third priority.
For handwashing, hot water is in a similar boat: even the hottest water your hands can stand is merely enough to speed up surfactant action, not to kill bacteria directly. For cleaning inanimate surfaces, sufficiently hot water is quite effective at killing bacteria, but most people’s hot water only goes up to 135°F or thereabouts, which is not scaldingly hot enough to do the job instantly.
For directly killing bacteria via non-heat means, alcohol and bleach are both far more effective than soap. Alcohol very rapidly strips off the cell wall and triggers immediate lysis, while bleach acts both as a saponifier (it turns fatty acids into soap) and a strong oxidizer (directly attacking the chemical structure of the cell wall and membrane, ripping it apart like a rapid-action biological parallel to rusting iron).
Fun trivia: your hand feels slippery or “bleachy” after handling bleach (or any reasonably strong base) because the outermost layer of your skin has been converted into soap.
I formulated this hypothesis on my own, but I have not seen evidence to back this up. I think a misunderstanding of this process has lead to the profusion of anti-bacterial soaps, which may be breeding hard-to-kill bacteria.
Those who are concerned may be interested to know that Ivory Liquid Hand Soap (and, in all the stores I’ve visited lately, no other) is a brand of liquid soap which contains no antibacterial ingredients.
Furthermore, it at least used to have a slogan like “so gentle you can even use it on your face” — and it does not have the warning “keep out of eyes” that, as far as I know, all antibacterial soaps have — and I do in fact use it as a face and body wash.
This is true, but it probably helps to state explicitly that a) the even for small pieces of meat the inside might not be at 165 F even if the outside is (so make sure that it is hot for a fair bit of time) b) This is more of an issue for larger pieces of meat (luminosity’s comment below is relevant).
There’s a related issue: if the meat is raw and frozen, life will be much easier if you defrost it before cooking it. Weird things can happen if you try to directly cook large bits of frozen meat. Generally it won’t result in health problems, but it does make stuff more likely to be burned in part or simply not taste good.
However, I find it much easier to slice meat for stir-frying which is still partially frozen. (This also speeds the thawing process.) Probably if you use a cleaver or other heavy, extremely sharp type of instrument, no prior thawing would be necessary; but I don’t trust myself with those.
For cooking larger pieces of meat than saturn addresses, the way I learnt what was and wasn’t needed was simply cooking meat, waiting until the outside looked cooked, then taking a piece out and cutting it in half. You’ll be able to see if it’s still bloody inside, or if it’s chicken you’ll be able to see if it’s turned white yet. Personally I prefer meat entirely cooked, but depending on your taste pinkish in the middle should be fine.
Doing this over time has given me a good feel for how long to cook meat for my preferences, though even now I still often slice pieces open to be sure.
This is good for getting a feel for how long to cook meat, but it also dries the meat out to some degree as you cook it. This is especially relevant for cooking steak, IMHO. For things like hamburgers, a simple meat thermometer will do the trick (brown both sides and cook until the inside is 165*F). For steak, it’s more difficult if you prefer your meat cooked less than medium-well.
I’m not much of a stir-fryer, but my general method for meat cooking is to have separate utensils for “before cooking” and “during-to-after”. So if I put the meat in the pan with a fork, that fork goes to the sink. But the wooden spoon that is cooked with the meat doesn’t get washed until I’m done eating, and is usually used as my serving spoon, too. If you are really concerned for safety, you could always use one cooking spoon until the surface of the meat is obviously brown, then switch to a fresh spoon.
If dealing with a low-fat meat (like moose), burger is much easier to cook than other meat, and is still healthy. It is hard to overcook, and easy to tell what’s safe, because all the little chunks of meat go from red to dark brown. High fat burger (like cow) is still tasty and easy to cook, but not terribly healthy.
One trick that I will immediately adopt is using an infrared thermometer to check for the 165F that saturn mentioned. Thanks for the info!
Generally, it is mainly chicken that one needs to be careful about, because it is sometimes contaminated with unhealthy bacteria, even when bought “fresh”. A general procedure with all meat, and especially chicken, is to wash any surface that raw chicken comes in contact with when you are done preparing it and have started to cook it, then wash any utensils you used that touched the chicken, and wash you hands. To be extra cautious, you can do that for any raw meat. Raw meat should be refrigerated soon after purchase and now allowed to stand uncooked at room temperature for more than the time it takes to prepare it.
Thanks for explaining that! But, um… I still have more questions… What is the procedure for washing the surfaces, the utensils, and my hands? How do I know when the meat is cooked enough to not qualify as raw? And for stir-frying raw meat, do I need to pause the stir-frying process to wash the stir-frying utensils, so that I don’t contaminate the cooked food with any raw juices that happen to still be on the utensils?
Salmonella bacteria is killed instantly at 165°F. Cooking small chopped or sliced pieces of meat is hard to do wrong because the surface area to volume ratio is high enough that they will be sterilized even before they start to appear cooked. Make your slices less than 1⁄2 inch thick and cook them until they start to turn golden brown. As long as the business ends of your utensils are in contact with the food as it cooks they will be sterilized along with it.
Assuming that you already know how to wash things in general, you don’t need to do it any differently. Normal washing is good enough because bacteria can’t grow without a source of nutrients and moisture, and you need to ingest a fairly substantial amount of bacteria in order to get sick.
We should add that soapy water does not kill the bacteria, but rather makes it impossible for them to adhere to anything, so they get washed down the drain.
Washing bacteria down the drain is certainly the primary purpose for using soap, by far, but surfactants like soap also kill a few bacteria by lysis (disruption of the cell membrane, causing the cells to rapidly swell with water and burst). In practice, this is so minor it’s not worth paying attention to: bacteria have a surrounding cell wall made of a sugar-protein polymer that resists surfactants (among other things), dramatically slowing down the process to the point that it’s not practical to make use of it.
(Some bacteria are more vulnerable to surfactant lysis than others. Gram-negative bacteria have a much thinner cell wall, which is itself surrounded by a second, more exposed membrane. But gram-positive bacteria have a thick wall with nothing particularly vulnerable on the outside, and even with gram-negative bacteria the scope of the effect is minor.)
In practice, the big benefit of soap is (#1) washing away oils, especially skin oils, and (#2) dissolving the biofilms produced by the bacteria to anchor themselves to each other and to biological surfaces (like skin and wooden cutting boards). Killing the bacteria directly with soap is a distant third priority.
For handwashing, hot water is in a similar boat: even the hottest water your hands can stand is merely enough to speed up surfactant action, not to kill bacteria directly. For cleaning inanimate surfaces, sufficiently hot water is quite effective at killing bacteria, but most people’s hot water only goes up to 135°F or thereabouts, which is not scaldingly hot enough to do the job instantly.
For directly killing bacteria via non-heat means, alcohol and bleach are both far more effective than soap. Alcohol very rapidly strips off the cell wall and triggers immediate lysis, while bleach acts both as a saponifier (it turns fatty acids into soap) and a strong oxidizer (directly attacking the chemical structure of the cell wall and membrane, ripping it apart like a rapid-action biological parallel to rusting iron).
Fun trivia: your hand feels slippery or “bleachy” after handling bleach (or any reasonably strong base) because the outermost layer of your skin has been converted into soap.
I formulated this hypothesis on my own, but I have not seen evidence to back this up. I think a misunderstanding of this process has lead to the profusion of anti-bacterial soaps, which may be breeding hard-to-kill bacteria.
Those who are concerned may be interested to know that Ivory Liquid Hand Soap (and, in all the stores I’ve visited lately, no other) is a brand of liquid soap which contains no antibacterial ingredients.
Furthermore, it at least used to have a slogan like “so gentle you can even use it on your face” — and it does not have the warning “keep out of eyes” that, as far as I know, all antibacterial soaps have — and I do in fact use it as a face and body wash.
This is true, but it probably helps to state explicitly that a) the even for small pieces of meat the inside might not be at 165 F even if the outside is (so make sure that it is hot for a fair bit of time) b) This is more of an issue for larger pieces of meat (luminosity’s comment below is relevant).
There’s a related issue: if the meat is raw and frozen, life will be much easier if you defrost it before cooking it. Weird things can happen if you try to directly cook large bits of frozen meat. Generally it won’t result in health problems, but it does make stuff more likely to be burned in part or simply not taste good.
However, I find it much easier to slice meat for stir-frying which is still partially frozen. (This also speeds the thawing process.) Probably if you use a cleaver or other heavy, extremely sharp type of instrument, no prior thawing would be necessary; but I don’t trust myself with those.
For cooking larger pieces of meat than saturn addresses, the way I learnt what was and wasn’t needed was simply cooking meat, waiting until the outside looked cooked, then taking a piece out and cutting it in half. You’ll be able to see if it’s still bloody inside, or if it’s chicken you’ll be able to see if it’s turned white yet. Personally I prefer meat entirely cooked, but depending on your taste pinkish in the middle should be fine.
Doing this over time has given me a good feel for how long to cook meat for my preferences, though even now I still often slice pieces open to be sure.
For beef, not chicken.
This is good for getting a feel for how long to cook meat, but it also dries the meat out to some degree as you cook it. This is especially relevant for cooking steak, IMHO. For things like hamburgers, a simple meat thermometer will do the trick (brown both sides and cook until the inside is 165*F). For steak, it’s more difficult if you prefer your meat cooked less than medium-well.
I’m not much of a stir-fryer, but my general method for meat cooking is to have separate utensils for “before cooking” and “during-to-after”. So if I put the meat in the pan with a fork, that fork goes to the sink. But the wooden spoon that is cooked with the meat doesn’t get washed until I’m done eating, and is usually used as my serving spoon, too. If you are really concerned for safety, you could always use one cooking spoon until the surface of the meat is obviously brown, then switch to a fresh spoon.
If dealing with a low-fat meat (like moose), burger is much easier to cook than other meat, and is still healthy. It is hard to overcook, and easy to tell what’s safe, because all the little chunks of meat go from red to dark brown. High fat burger (like cow) is still tasty and easy to cook, but not terribly healthy.
One trick that I will immediately adopt is using an infrared thermometer to check for the 165F that saturn mentioned. Thanks for the info!