With it looking like I might need to
remotely for a
while I’ve been thinking about how to make that more ergonomic.
There’s no position where I can use a laptop for very long without
hurting either my wrists or my neck. A couple months ago I made a
folding couch monitor to use while
sitting, but (a) that’s in the living room and (b) I generally prefer
to work
standing up. So I made
a small standing desk in our bedroom:
It’s a one-monitor version of my work
hardware setup (which is still the same three years later, except
that I have 27″ 2560 x 1440
monitors now). I use the laptop keyboard and trackpad because
that feels better on my wrists than any external keyboard and mouse
I’ve tried, and I don’t use the laptop monitor because that hurts my
neck.
While I’m calling it a desk, it’s really a shelf. It was easier to
attach a shelf to the wall with brackets than build something
freestanding, and a standard desk would take up a bunch more space.
It’s very small, but all I need is space for a monitor and my laptop.
The top is a 22.5“ by 17” piece of 3/4″ plywood painted white. I
rounded the outside corner for safety. I could have made the top a
couple inches narrower if I hadn’t been trying to match a specific
space. It’s 41“ off the ground, which is in the ~2” window where my
elbows can be close to a right angle.
The monitor stand doesn’t go high enough on its own, so it’s elevated
6.25“ with a 10.5” by 7.5″ pine box. I made it out of 2x6 scraps I had,
with a 3/4″ plywood top for the monitor stand’s base to sit on. I
didn’t paint this, though I might at some point.
I’m pretty happy with it, though all I’ve used it for so far is
writing this post.
Making a Standing Desk
Link post
With it looking like I might need to remotely for a while I’ve been thinking about how to make that more ergonomic. There’s no position where I can use a laptop for very long without hurting either my wrists or my neck. A couple months ago I made a folding couch monitor to use while sitting, but (a) that’s in the living room and (b) I generally prefer to work standing up. So I made a small standing desk in our bedroom:
It’s a one-monitor version of my work hardware setup (which is still the same three years later, except that I have 27″ 2560 x 1440 monitors now). I use the laptop keyboard and trackpad because that feels better on my wrists than any external keyboard and mouse I’ve tried, and I don’t use the laptop monitor because that hurts my neck.
While I’m calling it a desk, it’s really a shelf. It was easier to attach a shelf to the wall with brackets than build something freestanding, and a standard desk would take up a bunch more space.
It’s very small, but all I need is space for a monitor and my laptop. The top is a 22.5“ by 17” piece of 3/4″ plywood painted white. I rounded the outside corner for safety. I could have made the top a couple inches narrower if I hadn’t been trying to match a specific space. It’s 41“ off the ground, which is in the ~2” window where my elbows can be close to a right angle.
The monitor stand doesn’t go high enough on its own, so it’s elevated 6.25“ with a 10.5” by 7.5″ pine box. I made it out of 2x6 scraps I had, with a 3/4″ plywood top for the monitor stand’s base to sit on. I didn’t paint this, though I might at some point.
I’m pretty happy with it, though all I’ve used it for so far is writing this post.