It’s often helpful to be able to build or fix things without needing
to go to the store: perhaps it’s urgent, perhaps you don’t have a car,
perhaps there’s a pandemic on, perhaps you have an idea that you want
to try out before your interest fades. In cooking, the foods that you
keep on hand are often called “pantry staples”; what are the
equivalent consumables worth stocking for DIY projects?
For me, the key “ingredients” I want to have on hand are:
2x4s: 1½” by 3½” by generally 8′, very strong
though not infinitely so, lots of wood to sink a fastener into. Can
be doubled up if you need to make a post. It can be worth getting
some 2x3s as well (cheaper; useful when a 2x4 is more than you need)
and 2x6s (stronger; can span a wider distance; might happen to be a
useful thickness). I wouldn’t stock 2x8s or bigger since if I need
those I’m probably working on a big enough project that I’m getting
more materials anyway.
¾” plywood: comes in 4x8 sheets, but these are
unwieldy and too big to fit down my basement stairs so I usually have
the sheets cut into three 16“ or two 24” strips on the store’s panel
saw first. I usually get AB (one nice side, one decent side) softwood
since it’s reasonably cheap, easy to work with, and attractive enough
when sanded that I don’t mind it indoors. Having some ¼” plywood
can be useful for lighter things and spacing adjustments.
screws: you need some way to attach these together, and
screws are a good default. Traditionally the standard
fastener would be nails, but I find screws are a better fit for small
projects. I like that there’s no hammer blow to knock things out of
alignment or need to be braced against. Historically people have
preferred nails because of higher shear strength, but screws are
actually very
good here. Star-drive (torx) screws are a lot more pleasant than
Phillips (plus-shaped) because the bit stays on the screw more
easily. You want at least 3″ (attaching two 2x4s), 2¼” (attaching
¾” plywood to the flat side of a 2x4), and 1½” (attaching ¾”
plywood to more ¾” plywood) though I’ve also found ½”, ¾”, 1
¼”, and 3½” sizes useful enough to keep on hand.
glue: wood glue, or you can just use white glue. Before
screwing two pieces of wood together consider putting in a bit of
glue. You’ll get a much stronger joint, and the screws provide
clamping with no extra effort. Since the screws are there you
generally don’t need to wait for the glue to dry before continuing,
which removes the normal downside of using glue.
scraps: when you finish a project, keep your scraps,
especially the ones of more unusual materials. This collection of
weird shapes can provide inspiration, have the weird thing you’re
looking for, or keep you from needing to cut up a larger piece.
Wandering around the house, here are some examples I’ve made from just
these “staples”:
These are also good to have on hand for projects where you’re ordering
something special-purpose, but either don’t want to order staples as
well or won’t know exactly what you want until you have the new part:
Case, to go around an ordered USB controller (more):
Folding couch monitor, which needed the monitor and hinges (more):
Pantry Staples for DIY
Link post
It’s often helpful to be able to build or fix things without needing to go to the store: perhaps it’s urgent, perhaps you don’t have a car, perhaps there’s a pandemic on, perhaps you have an idea that you want to try out before your interest fades. In cooking, the foods that you keep on hand are often called “pantry staples”; what are the equivalent consumables worth stocking for DIY projects?
For me, the key “ingredients” I want to have on hand are:
2x4s: 1½” by 3½” by generally 8′, very strong though not infinitely so, lots of wood to sink a fastener into. Can be doubled up if you need to make a post. It can be worth getting some 2x3s as well (cheaper; useful when a 2x4 is more than you need) and 2x6s (stronger; can span a wider distance; might happen to be a useful thickness). I wouldn’t stock 2x8s or bigger since if I need those I’m probably working on a big enough project that I’m getting more materials anyway.
¾” plywood: comes in 4x8 sheets, but these are unwieldy and too big to fit down my basement stairs so I usually have the sheets cut into three 16“ or two 24” strips on the store’s panel saw first. I usually get AB (one nice side, one decent side) softwood since it’s reasonably cheap, easy to work with, and attractive enough when sanded that I don’t mind it indoors. Having some ¼” plywood can be useful for lighter things and spacing adjustments.
screws: you need some way to attach these together, and screws are a good default. Traditionally the standard fastener would be nails, but I find screws are a better fit for small projects. I like that there’s no hammer blow to knock things out of alignment or need to be braced against. Historically people have preferred nails because of higher shear strength, but screws are actually very good here. Star-drive (torx) screws are a lot more pleasant than Phillips (plus-shaped) because the bit stays on the screw more easily. You want at least 3″ (attaching two 2x4s), 2¼” (attaching ¾” plywood to the flat side of a 2x4), and 1½” (attaching ¾” plywood to more ¾” plywood) though I’ve also found ½”, ¾”, 1 ¼”, and 3½” sizes useful enough to keep on hand.
glue: wood glue, or you can just use white glue. Before screwing two pieces of wood together consider putting in a bit of glue. You’ll get a much stronger joint, and the screws provide clamping with no extra effort. Since the screws are there you generally don’t need to wait for the glue to dry before continuing, which removes the normal downside of using glue.
scraps: when you finish a project, keep your scraps, especially the ones of more unusual materials. This collection of weird shapes can provide inspiration, have the weird thing you’re looking for, or keep you from needing to cut up a larger piece.
Wandering around the house, here are some examples I’ve made from just these “staples”:
Table, as a project with the kids:
Reclining phone holder (more):
Monitor stand (more):
Sousaphone holder:
These are also good to have on hand for projects where you’re ordering something special-purpose, but either don’t want to order staples as well or won’t know exactly what you want until you have the new part:
Case, to go around an ordered USB controller (more):
Folding couch monitor, which needed the monitor and hinges (more):
Adapting a sliding window to fit an AC (more):
Everything I do this way does have a bit of a homemade look, but I really like how quickly I can make all sorts of sturdy things.
Comment via: facebook